To help you get the most out of your daily SPF routine, we've put together a practical guide covering everything you need to know about protecting your skin effectively every day.

Why Should You Wear SPF Every Day?

UV rays are present all year round—not just during the summer months.

While UVB rays are responsible for sunburn, UVA rays penetrate deeper into the skin and play a major role in premature ageing, loss of elasticity and the development of hyperpigmentation. Because UVA rays can pass through clouds and glass, your skin remains exposed whether you're driving, working by a window or enjoying a walk on a cloudy day.

That's why daily sun protection is one of the most effective ways to maintain healthy-looking skin and preserve a youthful complexion. Consistent SPF use helps minimise visible signs of photoageing while supporting your skin's long-term health.

Where Does SPF Fit Into Your Morning Routine?

Sunscreen should always be the final step of your morning skincare routine.

After cleansing, apply your serum, moisturiser and any other skincare products as usual, then finish with your SPF. If you wear make-up, allow your sunscreen to fully settle before applying foundation or other complexion products.

This ensures that the protective layer forms evenly across the skin, helping your SPF perform at its best.

How Much SPF Should You Apply?

One of the most common sunscreen mistakes is simply not applying enough.

When too little product is used, the level of protection on the skin is significantly lower than the SPF stated on the packaging.

For the face, the easiest guideline is the two-finger rule: apply two full lengths of sunscreen along your index and middle fingers. Don't forget often-overlooked areas such as the neck, ears and décolleté, which are regularly exposed to the sun and among the first areas to show signs of photoageing.

How to Prevent SPF Pilling

Pilling is one of the most common frustrations when using sunscreen. In most cases, it isn't caused by the SPF itself but by how products are layered within a skincare routine.

For the smoothest application, allow each product enough time to absorb before moving on to the next step. We recommend waiting approximately 60 to 90 seconds between applying your serum, moisturiser and sunscreen.

Apply SPF only once previous products have settled into the skin. Your skin should feel hydrated and comfortable—not wet, sticky or overloaded with product.

When applying sunscreen, avoid vigorous rubbing. Instead, gently spread the product across the skin and massage it in evenly. This helps minimise pilling while ensuring a smooth and consistent protective layer.

Once applied, allow your sunscreen a few minutes to set before applying make-up. This gives the formula time to adhere properly to the skin, helping make-up apply more evenly and wear better throughout the day.

Mineral Sunscreen for Oily and Blemish-Prone Skin

Many people still believe that sunscreen is too heavy for oily or blemish-prone skin. Fortunately, modern formulations prove otherwise.

Invisible Fluid SPF 50 was developed for all skin types, including sensitive, oily and blemish-prone skin. Its lightweight fluid texture absorbs quickly, feels comfortable on the skin and won't clog pores.

The non-comedogenic formula is enriched with carefully selected skincare ingredients, including ectoin, aloe vera, glycerin and jojoba oil. Together, they help maintain hydration, comfort and skin balance throughout the day while providing reliable mineral protection.

SPF Isn't Just for Summer

Although UVB radiation is typically less intense during winter, UVA rays remain present throughout the year.

Their effects accumulate gradually and often go unnoticed at first, but they contribute significantly to hyperpigmentation, fine lines, wrinkles and other visible signs of premature ageing.

For this reason, daily sunscreen use is important regardless of the season. Your skin benefits from protection during autumn, winter and early spring too—especially during outdoor activities or prolonged exposure to daylight.

Don't Forget to Reapply

For optimal protection, sunscreen should be reapplied approximately every two hours when spending extended periods outdoors.

Reapplication becomes particularly important after swimming, excessive sweating or towel-drying the skin, as the protective layer naturally wears away over time.

Regular reapplication is the key to maintaining the level of protection your sunscreen is designed to provide.

What's the Best Way to Remove SPF?

Applying sunscreen daily is one of the best habits for maintaining healthy-looking skin. But effective sun protection doesn't end with application—it also includes proper cleansing at the end of the day.

Mineral sunscreen, make-up, excess sebum and environmental pollutants can accumulate on the skin throughout the day. To ensure these impurities are thoroughly removed, we recommend double cleansing.

Double cleansing begins with an oil-based cleanser, such as Hemp Blessed Cleansing Oil, which gently dissolves sunscreen, make-up and excess oil without stripping the skin. Follow with a water-based cleanser, such as Purifying Face Cleanser, to remove any remaining impurities and leave the skin feeling fresh, balanced and comfortable.

This two-step cleansing method helps support a healthy skin barrier, keeps pores clear and prepares the skin to fully benefit from the rest of your evening skincare routine.

A Small Step That Makes a Big Difference

When it comes to maintaining healthy, radiant and youthful-looking skin, few habits are as effective as daily sun protection.

The secret isn't necessarily choosing the highest SPF available—it's applying the right amount consistently, every single day, and finding a formula that feels good on your skin.

Once you discover a sunscreen that suits your skin's needs, SPF becomes as natural a part of your morning routine as cleansing or moisturising. And as with most skincare habits, it's the small steps repeated daily that create the greatest long-term results.

Invisible Fluid SPF 50 combines high-performance mineral protection with a lightweight texture and carefully selected skin-loving ingredients that support your skin throughout the day. More than just the final step in your routine, it becomes a daily investment in your skin's health, comfort and natural radiance.

{id=237}

UV rays are present every day, throughout the year. They can reach the skin even when it is cloudy, making daily sun protection one of the simplest and most effective ways to support long-term skin health.

That is exactly why we created Invisible Fluid SPF 50.

A lightweight mineral sunscreen designed to become an effortless part of your daily skincare routine while helping to protect and support your skin every day.

More Than Protection From Sunburn

When we think about sun damage, we often think about sunburn. But many of the visible changes we associate with skin ageing happen gradually over time.

Uneven skin tone, pigmentation, loss of elasticity and increased sensitivity can all be influenced by daily UV exposure. At the same time, the skin is constantly challenged by environmental stressors such as pollution, temperature changes, dry air and urban living.

That is why we wanted Invisible Fluid SPF 50 to do more than simply shield the skin from the sun. We wanted a formula that supports the skin barrier while helping skin feel comfortable, balanced and resilient.

Why We Chose 100% Mineral Protection

At the heart of the formula is non-nano zinc oxide, a mineral UV filter that provides broad-spectrum protection against both UVA and UVB rays.

Mineral sunscreens are often preferred by those with sensitive, reactive or blemish-prone skin because they sit on the skin's surface rather than being absorbed into it. This makes Invisible Fluid SPF 50 suitable for all skin types, including skin prone to redness, acne, rosacea and hyperpigmentation.

For us, SPF is not just about preventing sunburn. It is about supporting healthy-looking skin every single day.

Barrier Support With Every Application

Healthy skin starts with a healthy skin barrier.

That is why we combined mineral UV protection with carefully selected skincare ingredients that help maintain hydration and support the skin's natural balance.

Ectoin helps the skin cope with environmental stress and supports moisture retention. Aloe vera provides an immediate feeling of comfort and freshness. Glycerin delivers lasting hydration, while jojoba oil helps support the skin's natural lipid barrier.

The result is skin that feels protected, hydrated and comfortable throughout the day.

A Sunscreen You'll Actually Want to Wear

The best sunscreen is the one you enjoy using every day.

Invisible Fluid SPF 50 has a lightweight, breathable texture that absorbs quickly and feels comfortable on the skin. It blends seamlessly, leaves no heavy residue and creates a natural-looking finish without a noticeable white cast.

Because it feels so effortless on the skin, it easily becomes a part of your morning routine.

Every Day Is SPF Day

Sun protection is not just for summer.

Whether you are commuting, working near a window, spending time outdoors or simply going about your day, UV exposure is part of everyday life. Consistent protection is one of the most effective ways to help maintain healthy-looking skin over time.

Apply Invisible Fluid SPF 50 to the face, neck and décolletage as the final step in your morning skincare routine. Reapply throughout the day as needed to maintain protection.

Because great sun protection should feel effortless. And because your skin deserves daily care that works in harmony with its natural needs.

{id=237}

And for good reason.

When the scalp is out of balance, hair rarely looks its best. It becomes greasy more quickly, loses volume at the roots and can feel heavy or lifeless. In many cases, the issue isn't the hair itself, but the build-up of excess oil, styling products and environmental impurities that accumulate on the scalp over time.

That's why scalp exfoliation has become one of the biggest developments in modern hair care. And among the most exciting ingredients leading this shift are PHA acids - a gentler, smarter way to deeply cleanse the scalp without compromising its natural balance.

What Are PHA Acids?

PHA (Polyhydroxy Acids) are a new generation of exfoliating acids known for their exceptionally gentle action. They help lift away dead skin cells, excess oil and impurities from the skin's surface while supporting hydration and maintaining the skin barrier. Unlike stronger exfoliating acids, PHA acids are particularly well tolerated, making them suitable even for sensitive skin.

While they first gained popularity in skincare, PHA acids are now finding their way into advanced scalp care formulas.

Why Does the Scalp Need Exfoliation?

Your scalp is exposed to daily build-up from:

• Dry shampoo residues
• Styling products
• Excess sebum
• Dead skin cells
• Pollution particles
• Mineral deposits from hard water

Over time, this accumulation can leave the scalp feeling congested and heavy. Hair may lose freshness faster, appear flatter at the roots and feel less vibrant overall. Some people also experience discomfort, sensitivity or itchiness.

A healthy scalp starts with effective cleansing, but not the kind that strips the skin of its protective barrier.resivnem smislu, ampak kot nežni čistilni podpori, ki pomaga vzpostaviti zdravo ravnovesje.

A Gentler Way to Purify the Scalp

Traditional scalp scrubs often rely on physical exfoliation, which can be too harsh, especially for sensitive scalps. PHA acids work differently.

Instead of mechanical friction, they gently loosen and remove build-up from the scalp surface, helping restore freshness while respecting the scalp's natural balance. This creates a cleaner, lighter feeling without irritation or discomfort.

This is precisely why PHA acids have become such a sought-after ingredient in modern cleansing shampoos.

Meet the Scalp-Cleansing Shampoo Powered by 3% PHA

One product embracing this innovative approach is the Hemptouch Revive Cleansing Shampoo.

Formulated with 3% PHA acids, it helps remove excess oil, product build-up and impurities while remaining exceptionally gentle on both the scalp and hair. Rather than creating that overly stripped, "squeaky-clean" sensation often associated with deep-cleansing shampoos, it supports a fresh, balanced scalp environment.

{id=228}

The result?

• A cleaner-feeling scalp
• Hair that stays fresh for longer
• Improved root volume
• Lightweight, airy strands
• Softness and natural shine

This modern cleansing philosophy aligns with what we now understand about scalp health: balance is far more beneficial than aggressive oil removal.

Who Will Love a PHA Cleansing Shampoo?

A scalp-cleansing shampoo with PHA acids can be especially beneficial if:

• Your hair becomes oily quickly
• Your scalp never feels completely fresh
• Styling products tend to build up
• Your roots lack volume
• You regularly use dry shampoo
• You live in an urban environment
• You have a sensitive scalp that dislikes harsh cleansing formulas

For these concerns, a formula such as Hemptouch Revive Cleansing Shampoo offers an effective yet gentle solution that supports both scalp comfort and beautiful-looking hair.

The Future of Hair Care Is Gentler

Just as skincare has evolved from aggressive treatments towards barrier-supportive care, scalp care is following the same path.

Today's goal isn't to strip the scalp. It's to create the ideal conditions for long-term scalp health through intelligent cleansing and gentle exfoliation.

PHA acids represent this new generation of scalp care. They help deliver the feeling of a truly clean scalp without dryness or discomfort, leaving hair feeling lighter, fresher and full of life after every wash.

Sometimes, the biggest transformation begins at the roots.

Immediate Protection, Long-Term Benefits

Once applied, they begin working immediately. There is no waiting time for activation. Their role is simple yet highly effective -  they absorb UV radiation, partially reflect it, and scatter it away from the skin. This helps reduce the impact of sun exposure and prevents damage that often becomes visible only over time. It is not only about preventing sunburn, but also about protecting the skin from premature ageing, loss of elasticity, and the appearance of pigmentation.

Zinc Oxide: The Foundation of Mineral Protection

At the heart of this protection is zinc oxide. It is one of the most well-researched and reliable mineral ingredients used in sun protection. What makes it particularly effective is its broad-spectrum performance, protecting the skin from both UVB and UVA rays. UVA rays penetrate deeper into the skin and are closely associated with photoaging. In addition, zinc oxide is known for its soothing properties. It helps calm redness, supports skin recovery, and is generally very well tolerated, even by sensitive, reactive, or blemish-prone skin.

Iron Oxides – Protecting Skin from the Effects of Visible Light

Modern skin protection goes beyond UV radiation alone. Increasing attention is being given to visible light, especially high-energy visible (HEV) or blue light emitted by both the sun and digital devices. While its effects are more subtle, long-term exposure can contribute to hyperpigmentation and uneven skin tone. This is where iron oxides play an important role. Often associated with tinted formulations, they also provide functional protection by helping to reduce the impact of visible light on the skin. They are particularly beneficial for skin prone to melasma or pigmentation concerns.

Zinc Oxide + Iron Oxides: A Complete Approach to Skin Protection

When zinc oxide is combined with iron oxides, the result is more than just sun protection. It becomes a comprehensive approach that protects the skin from multiple wavelengths of light while supporting a naturally even-looking complexion. The skin remains protected, yet balanced and comfortable.

Mineral filters have also evolved significantly in terms of formulation. Modern textures are lightweight and blend seamlessly into the skin, without leaving a heavy or chalky residue. Iron oxides often contribute to a subtle tone adaptation, helping the complexion appear more even and naturally refined.

Application Matters: Getting the Most from Your SPF

However, even the most advanced protection is only effective when used correctly. Adequate application is essential. Most people apply too little product, which significantly reduces the actual level of protection. For the face, a commonly recommended amount is approximately two finger lengths of product, applied evenly as the final step of the morning skincare routine. Although mineral filters work immediately, even and sufficient coverage is key, including often-missed areas such as the hairline, ears, and neck.

Sun protection is also not a one-time step. Throughout the day, the protective layer gradually diminishes due to touch, perspiration, and environmental exposure. This is why reapplication is crucial. It is generally recommended to reapply every two hours, especially during prolonged sun exposure. In practice, this means that SPF becomes part of your daily rhythm, not just your morning routine.

Sun protection is no longer just a basic step. It is a conscious choice. A way of understanding how different wavelengths of light affect the skin, and selecting ingredients that support its long-term health. Mineral filters remain one of the gentlest yet most effective solutions — a quiet form of protection that makes a visible difference over time.

{id=231}

But skincare has evolved. And now, SPF is no longer just the final step. It’s the one product that can do everything; protect, perfect, and elevate your skin in a single layer.

Tinted mineral sunscreen is at the centre of this shift.

When sunscreen meets skin tint

Think of it as your shortcut to effortless skin.

Tinted mineral SPF doesn’t just sit on top of your skin—it blends in. Thanks to mineral pigments (iron oxides), it softly evens out your complexion, diffuses redness, and gives that subtle, healthy-looking glow.

It’s not coverage in the traditional sense. It’s enhancement.

Your skin—just smoother, more even, and more radiant.

Why tinted formulas are more than just a trend

At its core, mineral sunscreen relies on zinc oxide, a gentle yet highly effective UV filter that sits on the skin’s surface and protects from UVA and UVB rays.

But here’s where tinted formulas go further.

The added pigments don’t just improve the look; they expand the protection. Tinted sunscreens help shield skin from visible light, including blue light from the sun and screens. This type of light penetrates deeper into the skin and is linked to hyperpigmentation, uneven tone, and premature ageing.

So you’re not just protecting your skin from sunburn. You’re helping prevent long-term skin changes, too.

No white cast. No compromise.

One of the biggest drawbacks of traditional mineral SPF has always been the white cast—especially on deeper skin tones.

Tinted formulas change that completely. The pigments counterbalance the natural whiteness of mineral filters, allowing the sunscreen to blend seamlessly into a wide range of skin tones.

The result is a formula that looks as good as it performs. Invisible protection, visible glow.

{id=231}

It feels like skincare—because it is

Modern tinted mineral SPFs are designed to feel like your favourite moisturiser.

Hydrating ingredients like aloe vera, glycerin and hyaluronic acid keep skin soft and comfortable throughout the day, while nourishing plant oils and butters support the skin barrier. Enriched with sea fennel, known for its antioxidant properties, the formula helps protect the skin from environmental stressors and supports a healthy-looking complexion.

This is sunscreen you forget you’re wearing.

A streamlined routine, finally - One layer, multiple benefits.

Tinted mineral SPF can easily replace your moisturiser, primer, and light foundation—especially on days when you want your skin to look like skin, just a little more polished.

It’s skincare that simplifies your morning without sacrificing results.

How to use it (so it actually works)

The key to effective SPF is simple, but often overlooked—use enough, and reapply.

For your face and neck, aim for about two finger-lengths of product. This is the amount needed to achieve the protection stated on the label. Less product means less protection, no matter how high the SPF number is.

When applying tinted sunscreen, start with a small amount and blend it evenly across the face, then build if needed. Let it settle for a few minutes so the texture and tone fully adapt to your skin.

And don’t forget reapplication. Sunscreen wears off throughout the day; whether from touch, sweat, or natural breakdown. Reapplying every two to three hours is key, especially with sun exposure. The beauty of tinted SPF is that it layers beautifully, making touch-ups easy and seamless.

{id=231}

The new standard of SPF

Sunscreen is no longer just about protection.It’s about how your skin looks, feels, and functions every single day. Tinted mineral SPF brings all of this together—broad-spectrum protection, skincare benefits, and a naturally perfected finish.

And once you find one you love, it stops being a step you remember…

and becomes one you never skip.

So, what is build-up and what causes it?

It’s when residue from your haircare products, minerals from hard water, or even your body’s own oil accumulate on your scalp. While almost everyone experiences this from time to time, persistent build-up can cause major hair challenges.

There are three main types of scalp build-up:

• Sebum build-up, caused by overactive oil production.
• Product residue, when shampoo, conditioner, or styling products are not fully rinsed away.
• Dead skin build-up, which occurs when skin cells shed too quickly, leading to flaking and itchiness.

A few key causes of product build-up:

Infrequent washing: Reapplying products between wash days allows layers of residue to accumulate on the scalp.

Dry shampoo: Designed to absorb oil at the roots, repeated use can easily lead to build-up over time.

Volumising products (mousse, gel, texture spray): Formulated to add grip and texture, these products can cling to the scalp, especially when layered.

Silicones: These ingredients form a film on the hair, making residue harder to remove with regular washing.

If left untreated, scalp build-up can affect the health and appearance of your hair, as it leads to hair that feels greasy, weighed down, or flat. In severe cases, build-up can result in scalp irritation, inflammation, and infection.

Ok, so I have build-up – how do I get rid of it?

Wash more often
Washing more frequently can help remove residue, but for many people it leads to dryness, irritation, or rebound oiliness — especially on sensitive scalps.

Use less product
Another simple way to reduce build-up is by using fewer products. By limiting the number of layers applied to the hair, there is less opportunity for residue to accumulate on the scalp. However, if you’ve found a combination of products that genuinely work for your hair and help you achieve your preferred style, removing one or more from your routine can be easier said than done.

Double cleanse – the tried and true method of eliminating build-up
Shampooing twice on wash days is often the most reliable way to remove scalp build-up. The first cleanse helps loosen and lift excess oil, product residue, and impurities, while the second cleanse focuses on properly cleansing the scalp and hair — much like removing makeup before washing your face. While this approach can take more time and means you may go through shampoo faster, it is effective.

There’s got to be a better way, right?

Yes — and it starts before you shampoo. Pre-wash scalp oiling is one of the most effective ways to remove build-up without stripping the scalp. Oil has a natural ability to dissolve excess sebum and oil-based residue, making it easier to lift away impurities before cleansing.

Instead of scrubbing harder or washing more often, a targeted pre-wash treatment helps loosen build-up so shampoo can do its job more effectively.

Hemptouch has you covered: meet CBD Revive Scalp Treatment, our intensive botanical pre-wash oil designed to gently dissolve excess sebum, product build-up, and impurities before you even step into the shower. The lightweight oil formula works like a cleansing balm for the scalp, helping to loosen and break down residue so shampoo can cleanse more effectively. Simply apply directly to the scalp, leave on for 20 minutes to 2 hours, then shampoo as usual.

{id=222}

CBD helps regulate sebum and soothe irritation, while tea tree and rosemary oils provide purifying, antimicrobial support to keep the scalp fresh and clean. Hemp seed, pumpkin seed, and castor oils replenish essential lipids, supporting the scalp barrier so it stays balanced rather than stripped. Peppermint oil delivers a refreshing cooling sensation that instantly relieves itchiness.

Despite being oil-based, the formula rinses out clean with shampoo, leaving no greasy residue — just a scalp that feels lighter, calmer, and truly clean. Now you can extend your wash days and use the products you love — knowing that regular pre-wash scalp oiling helps prevent build-up and keeps your scalp balanced, comfortable, and refreshed.

Users exchange experiences, opinions, and questions about choosing the right spectrum, concentration, dosage, and the potential effects on the body and overall wellbeing.

Because information shared on forums is often incomplete or based only on personal experiences, the following section answers the most common questions about CBD oil based on verified knowledge and scientific understanding.

How does CBD oil work and which receptors does it influence in the body?

CBD (cannabidiol) is a naturally occurring compound found in industrial hemp. In the body it primarily interacts with the endocannabinoid system, which plays a key role in maintaining balance, also known as homeostasis. The endocannabinoid system includes CB1 and CB2 receptors, endogenous cannabinoids, and specific enzymes.

CBD does not bind directly to CB1 and CB2 receptors. Instead, it influences them indirectly by modulating their activity. It also interacts with other receptors, including serotonin receptors such as 5-HT1A and TRPV1 receptors, which are involved in pain perception, mood regulation, and inflammatory processes.

What are the potential benefits of regular use of CBD oil?

Regular use of CBD oil may contribute to maintaining overall balance in the body. Research suggests that CBD has anti inflammatory, antioxidant, and calming properties.

Many users include CBD in their daily routine to support stress management, improve sleep quality, and promote physical and mental balance. It is important to emphasise that CBD is not a medicine but a supplement that supports the body’s natural processes.

How should CBD oil be dosed?

The appropriate dosage of CBD oil is individual and depends on factors such as body weight, metabolism, the concentration of CBD extract, and the intended purpose of use. A general recommendation is to start with a lower dose and gradually increase it until the desired effect is achieved.

{id=117}

The drops are usually taken sublingually, which means placing them under the tongue for 30 to 60 seconds to allow better absorption.

Which body processes are most influenced by CBD oil?

CBD oil mainly influences processes connected with the nervous system, immune response, and inflammation. The endocannabinoid system plays a role in regulating sleep, appetite, pain perception, mood, and stress response, which means CBD may indirectly support balance in these areas.

Which concerns may benefit most from CBD oil support?

Users most commonly include CBD oil as support during periods of stress, tension, sleep difficulties, or general feelings of overload. Because of its anti inflammatory properties, CBD is also often mentioned in relation to muscle tension and recovery after physical activity.

However, when dealing with more serious health concerns it is always advisable to consult a doctor or pharmacist.

How is CBD used in cosmetic products?

CBD is increasingly used in skincare and cosmetic formulations. Due to its antioxidant and anti inflammatory properties, it is suitable for the care of sensitive, reactive, or blemish prone skin.

{id=87}

In skincare products for the face and body it can help support skin balance, reduce redness, and strengthen the skin barrier. In this case the application is topical and does not have a systemic effect on the body.

Conclusion

CBD oil is not a miracle solution but a natural support for the body in maintaining balance. The key is to choose a high quality product, understand its spectrum and concentration, and use it thoughtfully and consistently.

Compared to women’s skin, men’s skin is thicker, firmer, and produces more sebum, which makes it more prone to oiliness and impurities. At the same time, frequent shaving makes it more sensitive and susceptible to redness. This is why men’s skin requires targeted yet gentle care.

Essential steps in men’s facial care

Cleansing the face

Regular facial cleansing is the foundation of healthy skin. In the morning, it removes excess sebum, while in the evening it clears away impurities and environmental residue. The Purifying Face Cleanser is suitable for daily use, as it gently cleanses the skin without stripping it or disrupting its natural balance. Thanks to its mild formulation, it is also suitable for skin that is particularly sensitive or reactive.

{id=55}

Exfoliation

Exfoliation helps remove dead skin cells, improve skin texture, and reduce the risk of ingrown hairs. For men’s skin, exfoliating once or twice a week is sufficient. It is important to choose a gentle exfoliant that does not cause micro irritation.

Skin hydration

Hydration is essential for all skin types, including oily skin. The Moisturising Bright Essence has a lightweight, fast absorbing texture that provides long lasting hydration without a greasy feel. The essence helps maintain skin elasticity and supports the skin’s natural protective function, which is especially important after cleansing or shaving.

{id=85}

Post shave care

After shaving, the skin is often irritated and sensitive. Soothing products free from alcohol help reduce redness and feelings of tightness. A hydrating essence or a lightweight Face Moisturizer can effectively support skin recovery.

Recommended products for men’s facial care

When choosing skincare products, it is advisable to opt for formulations that contain natural, skin friendly ingredients. Hemp seed oil and CBD are known for helping regulate sebum, soothe the skin, and strengthen the skin barrier.

Daily protection against UV radiation is equally important. The Mineral Shield Face Sunscreen SPF 30 provides broad spectrum protection against UVA and UVB rays and helps prevent premature skin ageing. Mineral filters are suitable even for sensitive men’s skin and do not irritate the skin after shaving.

{id=210}

Tips for everyday care

The key to effective skincare lies in a simple and consistent routine. It is better to use a few high quality products regularly than many products occasionally.

Common mistakes in men’s skincare include:

• skipping hydration
• using harsh cleansers
• neglecting sun protection

With regular use of gentle, natural products and a few essential steps, men can effectively maintain healthy, balanced, and youthful looking skin, regardless of skin type or lifestyle.

The result is skin that feels smoother, looks brighter, and appears more even. The strength of exfoliation can range from very gentle to more intensive, depending on the type of acid and its concentration.

Benefits of AHA and BHA acids

There are several well documented benefits of acid based exfoliation. AHA acids, such as glycolic and lactic acid, are proven to improve skin texture by supporting faster epidermal renewal.

They help reduce the appearance of roughness, dullness, and uneven tone. With regular use, they can also soften fine lines, pigmentation, and signs of photo damage. BHA acids, particularly salicylic acid, work differently. Because they are oil soluble, they penetrate pores more effectively, dissolve excess sebum, and help reduce blemishes linked to acne.

Thanks to their anti inflammatory properties, they are especially suitable for skin prone to clogged pores, breakouts, or excess oiliness.

The impact of acids on collagen synthesis

An important aspect of acid exfoliation is its effect on collagen synthesis. Numerous studies confirm that glycolic acid can stimulate fibroblasts, the cells responsible for collagen production, which over time contributes to firmer skin.

Lactic acid, due to its humectant nature, not only exfoliates but also hydrates the skin. This makes it particularly suitable for dry and sensitive skin that does not tolerate more aggressive acids well.

PHA acids as a gentle alternative

In recent years, PHA acids have gained increasing attention. Gluconolactone and lactobionic acid are considered among the gentlest chemical exfoliation options.

Because they have a larger molecular size than AHA and BHA acids, they penetrate the skin more slowly and act more superficially. This results in significantly less irritation. This makes them ideal for sensitive, irritated, or dryness prone skin.

In addition to gentle exfoliation, they offer a strong hydrating effect, as they act as humectants and help retain moisture. PHA acids are also known for their antioxidant properties, meaning they protect the skin from external stressors and further strengthen the skin barrier.

For this reason, they are an excellent choice for regular use, for beginners exploring acids, or for anyone seeking gentle yet effective skin renewal without tightness or redness.

How to choose the right acid for your skin type

Acid exfoliation can be suitable for many skin types, but selecting the right acid is essential.

Oily skin responds well to salicylic acid, which helps cleanse pores and reduce imperfections. Dry skin benefits more from AHA acids such as lactic acid, which combine exfoliation with hydration. For sensitive skin, PHA acids are the most recommended option, as they allow for safe and gradual texture improvement without the risk of irritation.

If concerns are persistent or the skin is highly reactive, consulting a dermatologist is advisable. A specialist can adjust the type and concentration of exfoliation to suit individual skin needs.

Levels of intensity in acid exfoliation

There are different levels of exfoliation intensity.

Superficial exfoliants, commonly found in toners, serums, or masks, work on the upper layers of the epidermis and are suitable for home use. More intensive exfoliations, often involving trichloroacetic acid, reach deeper layers and should be performed by professionals.

Deep exfoliations affect the deeper layers of the dermis and are part of medical procedures aimed at more pronounced skin concerns.

How to use acid exfoliation correctly

Proper use of acid exfoliation is essential for safety and optimal results. Before application, the skin should be clean and free from makeup or other active ingredients that could increase sensitivity. When introducing exfoliation, it is best to start slowly, using lower concentrations and gradually increasing frequency.

After exfoliation, the skin requires gentle care without strong actives. Daily use of a high protection factor is essential, as the skin becomes more sensitive to UV exposure after exfoliation.

Acid exfoliation is a highly effective tool for skin renewal when used thoughtfully and with close attention to the skin’s response.

This is why prompt action is essential. It helps relieve pain, reduces the risk of infection, and supports faster skin recovery. Understanding the extent of the injury and applying the correct care has a significant impact on the healing process and the final outcome.

First aid for burns

How to recognise the severity of a burn

First degree burns cause redness and pain without blistering, which is commonly seen with sunburn.

Second degree burns involve blistering, with the skin appearing intensely red and sensitive. In third degree burns, the skin may look pale, brown, or charred, and pain can be surprisingly mild due to nerve damage.

Steps for treating minor and more severe burns

For minor burns, the first step is immediate cooling under cool running water for at least ten minutes. Ice is not recommended, as it can further damage the tissue.

Blisters should not be punctured. After cooling, the area should be protected with a sterile, non adhesive dressing. Larger or deeper burns require immediate medical attention.

Until professional help is available, the burned area should be covered with a sterile cloth and the use of ointments, oils, or home remedies should be avoided.

When to seek medical help

Medical assessment is essential if the burn is larger than the palm of the hand, affects the face, hands, feet, genitals, or joints, or if signs of infection appear. These include increasing redness, warmth, discharge, or fever.

Burns in children, older adults, and people with chronic conditions require particular caution and prompt evaluation.

How to relieve symptoms of minor burns at home

First aid from your home cabinet

Aloe vera can gently cool and hydrate the skin surface. Cool compresses may help temporarily reduce pain. Honey has mild antibacterial properties, but it should only be used on small, closed injuries. Adequate hydration also supports skin regeneration from within.

Izdelki Hemptouch, ki podprejo kožo pri opeklinah

For minor, superficial burns, natural formulations can help soothe irritation, support recovery, and reduce tightness. These products should only be applied once the skin has closed and shows no signs of active oozing.

Intensive post burn care with Therapeutic CBD skin balm

The Therapeutic CBD skin balm represents the most intensive step in post burn care when the skin remains sensitive, irritated, or dry. With its high concentration of CBD extract, nourishing plant lipids, and protective ingredients, the balm provides anti inflammatory, soothing, and regenerative support. It also forms a gentle protective layer that helps reduce moisture loss.

{id=174}

This balm is ideal when the skin needs maximum support. It is particularly beneficial when the skin feels overwhelmed, sensitive to touch, and is actively regenerating. Its rich, nourishing texture helps stabilise the skin barrier and supports the healing process.

Supportive care with Soothing CBD skin balm

As the skin begins to close and enters the regeneration phase, gentle daily care becomes essential. At this stage, the Soothing CBD skin balm offers highly effective support thanks to hemp seed oil, CBD, and a complex of carefully selected essential oils. Together, these ingredients soothe the skin, maintain hydration, and support long term barrier recovery.

{id=50}

The balm is designed to accompany the skin through all stages of healing. From the first days of reduced sensitivity to full surface recovery, its formulation helps relieve tightness, supports the natural lipid barrier, and restores comfort.

After the burn has healed

Once acute symptoms subside, the skin often remains sensitive, dry, and tight. Regular care with gentle, nourishing formulations helps stabilise the skin barrier and restore comfort.

It is important to avoid harsh cleansers and mechanical friction, as these can further irritate recovering skin.

The importance of hydration and wound protection

Hydration is essential at this stage. It helps reduce itching and supports the skin’s natural repair processes. Skin healing after a burn is particularly prone to pigmentation changes, making daily sun protection essential. Even brief sun exposure can lead to long lasting dark marks on newly healed skin.

Preventing infection and further complications

During healing, it is important not to scratch the skin or remove scabs, as this increases the risk of infection and scarring. Gentle hygiene and careful monitoring for changes such as warmth, increased redness, or discharge help identify complications early and ensure timely action.